The REDARC Hummingbird Configurable Cabin Pressure Monitor measures pressure in the cab and compares it with atmospheric pressure. When the pressure in the cab drops to a level that is not high enough to prevent dust and other materials entering the cab, a green light on the unit turns red. As long as the pressure is low, a normally high output goes low allowing interface to external units.
High-pressure events are also monitored. Using an internal rotary switch the Cabin Pressure Monitor can be configured to alarm at low pressures between 10Pa and 90Pa (1mm to 9mm H20). Based on customer feedback, the cabin pressure alarm is supplied pre-set to 50Pa (5mm H20) low pressure and 300Pa high pressure.
A precision sensor allows pressure to measure to a resolution of 0.1mm H20. The measured pressure is temperature compensated to allow operation over a wide range of temperatures. An extremely high sensor burst pressure of 5000Pa means that door slams will not affect the sensor.
Push fittings allow for quick installation of the tube to the outside. A spare bulkhead push fitting is provided to enable sealed entry through the vehicle firewall if required. Mounting slots are provided on either side of the enclosure
Features
- Multi-voltage 12/24V
- Optional remote output to drive buzzer
- Optional RS232 for remote monitoring
- Red/Green LED indicates fail/pass
- Comes in a kit with everything you need for a quick installation
- Installer settable air-pressure threshold
| gtin_barcode | 9338628009619 |
|---|---|
| Operating Temperature | 0° - 50°C |
| Weight | 0.08kg |
| height | 22mm |
| width | 51mm |
| depth | length | 50mm |
| Warranty | 2 Years |
| Input Voltage | Minimum 9V; Maximum 36V |
Shipping
REDARC offers customers free freight within Australia on products purchased via the REDARC website, unless a dangerous goods charge is deemed necessary in order to ship products of a lithium chemistry.All products have a 5 day lead time before shipment after which it will be shipped via your preferred shipping method. For alternative freight options please contact REDARC at power@redarc.com.au
For international orders, freight will be calculated at time of checkout. Orders will be shipped from our factory in Lonsdale with delivery timeframes dependant on location.
Where orders are shipped to a delivery address outside Australia, you are responsible for the compliance terms as written in our Website Terms of Use
Returns
The terms and conditions relating to 'Return of goods' set out in our Trading Terms will apply to all good purchased by You via the Site. All goods purchased by You via the Site also come with a manufacturer's warranty found here.
HAVE A QUESTION?
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.
FIND REDARC AT LEADING RETAILERS
