How to connect the RedVision Configuration App to your RedVision System

The below guide will walk you through the process of connecting your device (smartphone or tablet) to the REDARC RedVision system.

This information is applicable to the following RedVision Systems:

• All RedVision systems including the RedVision Display (DISP3400-RC)

REDVISION DISPLAY

MAIN MENU SCREEN

Scroll across to the System Settings, using the left arrow, located on the right, below the screen.

SYSTEM SETTINGS SCREEN

Scroll up or down on the Display Settings using the up/down arrows, located on the left, below the screen.

DISPLAY SETTINGS SCREEN

Select the Bluetooth Icon, using the bottom soft key, located on the left of the screen.

BLUETOOTH PAIRING SCREEN

It will then specify Bluetooth Pairing Advertising.

OPEN THE REDARC CONFIGURATOR APP

Keep your phone as close as possible to the RedVision Display during configuration. The RedVision Configurator App and RedVision App can be downloaded for free on both the App Store on iOS and Play Store on Android devices. 

The RedVision app will present the introduction page. 

Tap Skip, if you want to skip the introduction or swipe left then tap Done. 

The app will prompt to enable permissions, tap Allow. 

The app will request permissions for Bluetooth and Location settings. Enabling these permissions is essential for the smooth operation of the RedVision App. 

The app will have two main options; Import Config and Read Device. 

If configuring for the first time, tap Read Device and the app will scan for a system, select your system by tapping Connect. 

In systems that have multiple devices ensure you connect to the RedVision Display REDARC DISP rather than the Smart Battery Monitor. 

If you have a configuration to import, select Import Config. 

The configuration will need to be saved to your device's files to be selected.

Once the system is selected it will read the default configuration in the screen, this may take a few moments. 

Enter the PassCode shown on the RedVision Display into the PIN section of the app. 

Then tap Pair.

At no point should the Bluetooth connection be established through the device settings on your phone or tablet. 

After the configuration has been read, you can begin setting up your system. 

Add a Configuration Name. 

Tap Unit Preferences.

Set the temperature unit to Celsius or Fahrenheit. 

Tap Save.

To view or download the full RedVision Configuration guide, click here.