Finding the right spare part is essential to keeping your REDARC gear performing at its best. Whether you're replacing a worn component or upgrading your setup, our Spare Part Guide has all the sapres and their compatibility across our product range. From cables and connectors to remote heads and fuses, we've designed our spare parts to seamlessly integrate with your existing REDARC gear. Explore this comprehensive guide to ensure you get the perfect fit for your system and keep your adventures powered without interruption.
-
![Manager30 Green Terminal Block]()
Manager30 Green Terminal Block CONN155A$33.00Replacement six way terminal block for the Manager30.
-
![Manager30 240V Mains Cable]()
-
![Manager30 Display Surround]()
Manager30 Display Surround PLAS1A$6.00Replacement plastic outer surround for the Manager30 Display.
-
![Manager30 Display Backing Plate]()
Manager30 Display Backing Plate PLAS3A$6.00Replacement plastic backing plate for the Manager30 Display.
-
![5m RJ45 Network Cable]()
-
![Brake-Safe Break-Away Switch with Coil Cable]()
Brake-Safe Break-Away Switch with Coil Cable BASWITCHA$83.00Replacement Brake-Safe Break-Away switch with coil cable.
-
![BCDC Wiring Kit Terminal Block]()
BCDC Wiring Kit Terminal Block CONN306A$28.00Replacement Terminal Block to suit the BCDC Wiring Kit range.
-
![BCDC Connector Kit]()
-
![BCDC Wiring Kit Terminal Block Cover]()
BCDC Wiring Kit Terminal Block Cover CVR192A$6.22Replacement Terminal Block cover for the BCDC and PowerDock Wiring Kit.
-
![40A MIDI Fuse]()
-
![BCDC Accessory Kit]()
-
![EGT Sensor 2-Pin Connector]()
-
![Gauge Mounting Kit]()
-
![1/8 NPT Weld on Bung]()
-
![Boost Gauge T Piece]()
Boost Gauge T Piece PLAS26A$5.01Replacement plastic T Piece compatible with REDARC's Boost Gauges.
-
![Boost Gauge Boost Hose]()
-
![Gauge Main Power Wiring Harness]()
-
![Dual Voltage Gauge Wiring Harness]()
-
![EGT + Boost Gauge Wiring Harness]()
-
![Oil Temperature/Temperature Gauge Wiring Harness]()
Oil Temperature/Temperature Gauge Wiring Harness WIR391A$81.94Replacement Oil Temperature/Temperature Gauge wiring harness.
-
![Triple Temperature Gauge Wiring Harness]()
Triple Temperature Gauge Wiring Harness WIR392A$48.62Replacement Triple Temperature Gauge wiring harness.
-
![Single Oil Pressure Gauge Wiring Harness]()
Single Oil Pressure Gauge Wiring Harness WIR393A$42.25Replacement Single Oil Pressure Gauge wiring harness.
-
![Temperature/Amp Gauge Wiring Harness]()
Temperature/Amp Gauge Wiring Harness WIR394A$29.46Replacement Temperature/Amp Gauge wiring harness.
-
![BCDC Wiring Kit Terminal Block Cover]()
BCDC Wiring Kit Terminal Block Cover CVR192A$6.22Replacement Terminal Block cover for the BCDC and PowerDock Wiring Kit.
-
![SBI Lower Solenoid Nut]()
SBI Lower Solenoid Nut NU40A$5.01Replacement SmartStart Smart Battery Isolator lower solenoid nut.
-
![SBI Main Solenoid Nut]()
-
![SBI Stud Cover]()
-
![TVMS Prime 2-Way Power Connector]()
TVMS Prime 2-Way Power Connector CONN189A$10.32Replacement red 2-way power connector to suit the TVMS Prime.
-
![TVMS Prime 30A 5-way Power connector]()
TVMS Prime 30A 5-way Power connector CONN191A$13.00Replacement 30A 5-way connector to suit the TVMS Prime.
-
![TVMS Prime 30A 5-way Earth connector]()
TVMS Prime 30A 5-way Earth connector CONN192A$13.00Replacement 30A 5-way connector to suit the TVMS Prime.
-
![TVMS Prime 10A 5-way Power connector]()
TVMS Prime 10A 5-way Power connector CONN193A$8.00Replacement 10A 5-way power connector to suit the TVMS Prime.
-
![TVMS Prime 10A 5-way Earth connector]()
TVMS Prime 10A 5-way Earth connector CONN194A$8.00Replacement 10A 5-way earth connector to suit the TVMS Prime.
-
![TVMS Prime Digital I/O Connector]()
TVMS Prime Digital I/O Connector CONN195A$8.00Replacement digital I/O connector for the TVMS Prime.
-
![TVMS Terminating Resistor]()
TVMS Terminating Resistor CONN196A$5.01Replacement RJ45 R-Bus terminating resistor to suit the TVMS Prime, TVMS Rogue and RedVision display.
-
![RedVision Display Cover]()
-
![80A MIDI Fuse]()
-
![MIDI Fuse Holder (TVMS Prime)]()
-
![TVMS Temperature Sensor]()
-
![RedVision Display Mounting Spacer]()
-
![Water Tank Sensor Crimp Terminal]()
-
![1m RJ45 Network Cable]()
-
![5m RJ45 Network Cable]()
-
![3m TVMS Inverter Communication Cable]()
3m TVMS Inverter Communication Cable WIR423A$12.00Replacement 3m TVMS Inverter communication cable.
-
![Tow-Pro Elite V1 & V2 Remote Head Bezel]()
Tow-Pro Elite V1 & V2 Remote Head Bezel BEZ2A$5.01Replacement Remote Head bezel for the Tow-Pro Elite V1 & V2.
-
![Tow-Pro Classic Remote Head]()
-
![Tow-Pro Elite V3 Remote head Dial]()
-
![Tow-Pro Classic Remote Head Dial]()
-
![Tow-Pro Elite V3 Decal & Nut Kit]()
Tow-Pro Elite V3 Decal & Nut Kit KIT11A$6.00Replacement stick-on decal and clear nut for Tow-Pro Elite V3.
-
![Tow-Pro Elite V2 Remote Head Nut]()
-
![Tow-Pro Elite V3 Remote Head Nut]()
-
![4 Pin Power Harness for Tow-Pro Elite]()
4 Pin Power Harness for Tow-Pro Elite WIR355A$55.00Replacement 4-pin power harness for the Tow-Pro Elite.
-
![1m RJ45 (Cat5E) Network Cable]()
-
![REDARC RHWK-001]()
1m Tow-Pro Elite Remote Head Wiring Kit RHWK-001A$20.00The REDARC Tow-Pro Elite Remote Head Wiring Kit is a 1-metre cable that interconnects the Remote Head to the Main Unit.
NOT SURE WHAT YOU NEED?
Need a little help choosing the right product? REDARC's Technical Support Team are always ready to help or
find a local installer or stockist in your area.