![REDARC TPH-001]()
Jeep Cherokee suitable Tow-Pro Brake Controller Harness (TPH-001) TPH-001A$47.00The US vehicle specific REDARC Tow-Pro TPH-001 wiring harness offers the ability to connect the Tow-Pro™ Elite electric brake directly into a Jeep Cherokee vehicle.
Tow-Pro Wiring Kits
REDARC offers a range of Tow-Pro Wiring Kits and US vehicle specific wiring harnesses. The Tow-Pro Wiring Kits provide ‘plug and play’ style connectivity for optimum installation convenience. REDARC’s US vehicle specific wiring harnesses offer the ability to connect the Tow-Pro Elite Electric Brake Controller directly into factory towing package connectors behind the vehicle’s dash. learn more
TOW-PRO WIRING KITS AVAILABLE
REDARC provide universal wiring kit options for the Tow-Pro Elite. The difference between the Universal Wiring Kit (TPWKIT-013) and the Universal Extended Wiring Kit (TPWKIT-014) is the Universal Extended Wiring Kit (014) kit comes with a longer power harness for the increased cable run to the start battery. Please see picture below to aid in your decision.
Please note, that if you are unsure, get the TPWKIT-014 kit as this will give you more cable to work with.
Vehicle
Part Number
Ford Everest/Ranger
not compatible with Tow-Pro Elite 12V
TPWKIT-012
Holden Colorado
TPWKIT-013
Mazda BT-50
TPWKIT-013
Isuzu (all models)
TPWKIT-013
Mitsubishi Pajero
TPWKIT-013
Mitsubishi Triton
TPWKIT-014
Nissan Navara
TPWKIT-014
Nissan Y62 Patrol
TPWKIT-013
Nissan Y62 Patrol ('Warrior' Model)
TPWKIT-014
Toyota Hilux
TPWKIT-013
Toyota Fortuner
TPWKIT-013
Toyota Kluger
TPWKIT-013
Toyota LC200 & LC300
TPWKIT-014
Toyota Prado
TPWKIT-013
Volkswagen Amarok
TPWKIT-014
REDARC have a range of Tow-Pro Elite remote head wiring cables in lengths from 1m - 6m to increase the flexibility of installation. Our range of US vehicle specific wiring harnesses provides the ability to connect the Tow-Pro Elite directly into the factory towing package connector behind a vehicle dash.
COMPATIBILITY AND CONNECTION NOTES
- V1 & V2 utilised a CAT5 cable with twin RJ45 connectors
- Tow-Pro Elite V3 utilises automotive grabde 8 pin connectors
-
The Tow-Pro Elite 12V is compatible with all Tow-Pro Switch Inserts except TPSI-008, TPSI-010, TPSI-011 and TPSI-012, and also compatible with all Tow-Pro wiring kits
-
Tow Pro-Elite 12V is not compatible with the Ford Everest and Ranger
REDARC TOW-PRO ELITE WIRING DIAGRAM & INSTRUCTIONS
TOW-PRO WIRING KITS FAQ
WHAT IS THE DIFFERENCE BETWEEN A TOW-PRO WIRING KIT AND A WIRING HARNESS?
The Tow-Pro Wiring Harnesses have been designed specifically to work with the factory tow package connectors behind the dash in a range of US specific vehicles.
WHAT SIZE WIRE DO I NEED FOR THE REDARC TOW-PRO?
- Black and blue wires, use 3mm² Cable (6mm automotive cable or 12AWG)
- Red and White wires, use 1.25mm² Cable (4mm automotive cable or 16AWG)
WHAT'S INCLUDED IN THE TOW-PRO WIRING KIT PACKAGE?
The REDARC Tow-Pro Wiring Kits come with the complete range of hardware required to install a Tow-Pro Brake Controller. That includes a Wago Boot, Protection Device, Wiring Harness, Mounting Bracket and fitting instructions.
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.
NEED SOME HELP?
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.
FIND REDARC AT LEADING RETAILERS & SPECIALISTS
Copyright © 2025 REDARC. All rights reserved.