The REDARC BCDC2420 battery charger is a 24 Volt 20 Amp, three stage DC DC charger that operates from a vehicle input between 9 and 32 Volts DC. It is designed to charge any commonly used automotive 24V battery system to an optimal level with chemistry specific battery charging algorithms.
With potted and sealed electronics, this DC-DC charger is perfect for under bonnet installations to withstand heat, water, dust and vibration to deliver perfect performance every time.
The BCDC2420 features a multi-stage charging algorithm, with a 24V charging output the DC to DC charger is perfectly suited to trucking applications such as charging battery banks for tailgate lifters and side curtains.
The BCDC2420 features a MPPT Solar Regulator, which means 12V solar panels can be used to charge your 24V auxiliary batteries. The MPPT Solar charging algorithm extracts the maximum available power from your solar panels at any given time.
Features
- Multi-Stage DC to DC Battery Charger
- MPPT Solar Regulator
- Start Battery Isolator
- Sealed electronics
- No fan for super-quiet operation
- Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries
Mounting Brackets
REDARC offer a range of vehicle-specific mounting brackets for our BCDC DC-DC Charger range. The 304 stainless steel bracket allows installation into the front of the vehicle for cooler airflow, ensuring optimal performance. They have been designed to fit existing mounting points in the vehicle.
| Warranty | 2 Years |
|---|---|
| gtin_barcode | 9338628003334 |
| brand | REDARC |
| Battery Chemistry | AGM, Gel, Standard Lead Acid, Calcium |
| Nominal Output Power | 600W |
| Input Fuse Rating | 60A (Not supplied) REDARC FK60 recommended |
| Solar Switch On Voltage | 17.5V |
| Suitable For 12V Systems | Yes |
| Suitable For 24V Systems | Yes |
| Solar Input Voltage | 9 - 32V |
| MPPT Solar Regulator | Yes |
| Cabin/ Canopy Install | Yes |
| No Load Current | <100mA |
| Trailer Install | Yes |
| Engine Bay Install | Yes |
| Max. Charging Voltage | 30.6V |
| Output Fuse Rating | 40A (Not supplied) REDARC FK40 recommended |
| Operating Temperature | −20°C to +80°C |
| Output Voltage | 24V DC |
| Max. Rated Output Current | 20A |
| Input Voltage | 9 - 32V |
| Standby Current | <8mA |
| Connector Type | Bare wire |
| Weight | 650 g |
| width | 120 mm |
| height | 37 mm |
| depth | length | 150 mm |
Shipping
All REDARC orders within Europe are distributed by Oz4x4.
For more information and delivery times, please contact Oz4x4 or see their Shippng FAQs.
Returns
For all refund questions, please contact Oz4x4 or see their Shipping FAQs.
RELATED PRODUCTS
HAVE A QUESTION?
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.