Hummingbird Dual Axis Tilt-Sensor - TCM Output

SKU
HMTS2CFG232-TCM
NZ$686.41
Out of stock
Product details

Hummingbird Electronics' RS232 output Tilt-Sensor provides 0.1 degree accurate pitch and roll angles in a serial message compatible with Trimble's TCM protocol.

Product manuals and brochures
OVERVIEW

Hummingbird Electronics' RS232 Tilt Sensor measures pitch and roll angles with high accuracy by measuring movement relative to the earth's unchanging gravitational with a 3-axis accelerometer.

The accelerometer is calibrated for use over a -90 to 90-degree angle over a -40 to 85 degree Celsius temperature range. It is accurate to 0.1 degrees for up to 30 degrees of tilt in any axis. Parameters associated with the sensor such as the damping factor (how much averaging is performed) and calibration can be changed through a built-in serial interface. An internal bi-colour LED is normally red and pulses to green each time a message is sent. Mount the Tilt-Sensor with the interface cable facing to the stern (back) of the vessel and the mounting flange on the deck of the vessel.

RUGGED HARDWARE

The configurable tilt-switches are supplied in a rugged aluminium enclosure that is splash-proof. Provision for screw mounting, when required, is provided. Power to the unit and outputs are provided through colour coded wires.

SPECIFICATIONS:
  • Device type: TCM Output Dual Axis Tilt Sensor
  • Number of axis: Dual Axis, unit must be mounted level with the base plate down
  • Angle of operation: -90 to 90 degrees in both axis
  • Resolution of sensor: 0.1 degrees (-30 to 30 degrees), 0.25 degrees over the full operation range
  • Frequency response: Minimum 0.01Hz, Maximum 10Hz. Default 0.3Hz
  • Voltage Range: 9-36V, reverse polarity protected
  • Current consumption at 12V: 50mA at 12V and 30mA at 24V typical
Specifications
More Information
height 35mm
width 57mm
depth | length 82mm
Warranty 2 Years
Input Voltage Min. 9V; Max. 36V
SHIPPING & RETURNS
Shipping

REDARC offers customers free freight within Australia on products purchased via the REDARC website, unless a dangerous goods charge is deemed necessary in order to ship products of a lithium chemistry.All products have a 5 day lead time before shipment after which it will be shipped via your preferred shipping method. For alternative freight options please contact REDARC at power@redarc.com.au

For international orders, freight will be calculated at time of checkout. Orders will be shipped from our factory in Lonsdale with delivery timeframes dependant on location.

Where orders are shipped to a delivery address outside Australia, you are responsible for the compliance terms as written in our Website Terms of Use

Returns

The terms and conditions relating to 'Return of goods' set out in our Trading Terms will apply to all good purchased by You via the Site. All goods purchased by You via the Site also come with a manufacturer's warranty found here.

REVIEWS

HAVE A QUESTION?

Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.

Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.