Hummingbird Electronics' GPS Speed Switch provides a simple to install, calibration free speed based switch.
Speed thresholds are set using internal switches in either km/h or mi/h. Using data received from the Global Positioning Satellite network, the GPS Speed Switch calculates three-dimensional ground speed. If the speed exceeds the threshold, relay contacts switch, providing the installer with maximum versatility.
This high technology solution eradicates the dependency on vehicle specific parameters, thereby reducing installation time and eradicating the need for periodic calibration.
POWERFUL PERFORMANCE
Speed Switches have traditionally used speed-signals derived from gearbox mounted hall-effect or inductive speed senders. The Hummingbird Electronics' speed switch integrates the source of the speed signal with the switch resulting in a small, reliable solution. No calibration is required and operation is completely independent of the vehicle.
Three dimensional velocity calculations are accurate to 0.2km/h and are updated 10 times per second. A 50 channel satellite receiver, enhanced receiver sensitivity and active antenna result in fast time-to-first-velocity-calculation as well as the ability to operate in the harshest RF environments such as canyons and cities.
Last known position and satellite information critical to fast start-up are battery backed in case of power failure.
A voltage free relay output with common(30), normally-open (87) and normally-closed (87A)terminals is provided. At low speed, the common contact is connected to the normally closed contact and when the speed set point is exceeded, the common terminal will be switched over to the normally open contact.
Designed for harsh automotive environments, the module features transient voltage protection on the supply and short circuit protected outputs.
RUGGED HARDWARE
GPS Speed Switch is supplied in a rugged aluminium enclosure with provision for screw mounting when required. Antenna connection for the active antenna is provided through a gold-plated threaded SMA connector
FEATURES:
- Ideally suited to providing a warning or taking action when a vehicle exceeds a given speed.
- No connection to vehicle electrics
- Voltage free relay output
- Adjustable speed limit
- km/h or mph
- External GPS & GLONASS antenna
- Multi voltage 12/24V
- Installer settable speed threshold
gtin_barcode | 9338628009107 |
---|---|
Weight | 0.25kg |
height | 35mm |
width | 57mm |
depth | length | 82mm |
Warranty | 2 Years |
Input Voltage | Min. 9V; Max. 36V |
Shipping
REDARC offers customers free freight within Australia on products purchased via the REDARC website, unless a dangerous goods charge is deemed necessary in order to ship products of a lithium chemistry.All products have a 5 day lead time before shipment after which it will be shipped via your preferred shipping method. For alternative freight options please contact REDARC at power@redarc.com.au
For international orders, freight will be calculated at time of checkout. Orders will be shipped from our factory in Lonsdale with delivery timeframes dependant on location.
Where orders are shipped to a delivery address outside Australia, you are responsible for the compliance terms as written in our Website Terms of Use
Returns
The terms and conditions relating to 'Return of goods' set out in our Trading Terms will apply to all good purchased by You via the Site. All goods purchased by You via the Site also come with a manufacturer's warranty found here.
HAVE A QUESTION?
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.