Hummingbird's GPS Speedometers provide a quick to install, vehicle-independent speed readout in vehicles that are not fitted with conventional speedometers.
Using data received from the Global Positioning Satellite network the GPS Speedometer calculates three-dimensional ground speed and displays it on a clear to read digital display.
This high technology solution eradicates the dependency on vehicle specific parameters, thereby reducing installation time and eradicating the need for periodic calibration.
POWERFUL PERFORMANCE
Designed for harsh automotive environments, the module features 1 inch high, high brightness red LED digits. Automatic contrast adjustment ensures that the driver is able to read the display in daylight, and is not blinded
at night.
The ability to track 20 satellites simultaneously, enhanced receiver sensitivity and active antenna result in fast time-to-first velocity calculation as well as the ability to operate in the harshest RF environments such as canyons and cities. Speed errors will occur in RF blackout zones such as tunnels;
this is indicated to the driver through a flashing display.
Three dimensional velocity calculations are accurate to 0.2km/h and speed readings are updated 10 times per second.
Hummingbird's Digital GPS Speedometer can be user configured to work in kilometers per hour, miles per hour, knots or meters per minute.
A relay can be set to close when the speed exceeds a user specified set-point. Typical applications for the speed switch would be driver over-speed warning or motion detection. Activation speed is set via a dip switch internal to the device and cannot be changed by the operator. The maximum speed can be set to be between 0 and 999 or between 0 and 99.9. The more precise setting is suitable for slow vehicles like tractors.
FEATURES:
- High visibility display
- Adjustable speed limit – operators can not adjust limit
- Internal relay to drive external alarm
- Display auto dims at night
- Internal antenna option available (HMSS1000BI)
- Multi voltage 12/24V
- Rugged RAM Mount
- Reverse polarity protected
| gtin_barcode | 9338628009053 |
|---|---|
| Weight | 0.25kg |
| height | 66mm |
| width | 86mm |
| depth | length | 25mm |
| Warranty | 2 Years |
| Input Voltage | Min. 9V; Max. 36V |
Shipping
REDARC offers customers free freight within Australia on products purchased via the REDARC website, unless a dangerous goods charge is deemed necessary in order to ship products of a lithium chemistry.All products have a 5 day lead time before shipment after which it will be shipped via your preferred shipping method. For alternative freight options please contact REDARC at power@redarc.com.au
For international orders, freight will be calculated at time of checkout. Orders will be shipped from our factory in Lonsdale with delivery timeframes dependant on location.
Where orders are shipped to a delivery address outside Australia, you are responsible for the compliance terms as written in our Website Terms of Use
Returns
The terms and conditions relating to 'Return of goods' set out in our Trading Terms will apply to all good purchased by You via the Site. All goods purchased by You via the Site also come with a manufacturer's warranty found here.
HAVE A QUESTION?
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.