How to change between modes on your Tow-Pro

Changing between modes on the REDARC Tow-Pro Elite brake controller requires the user to complete the following process: 

Changing modes can only be completed with the trailer connected. Ensure the vehicle has come to a complete stop before beginning the mode change process;

• Set the knob to 0
• Apply vehicle brakes
• Double-click the knob (i.e. two pushes within 1s) to toggle the mode
• Release vehicle brakes

Ensure you adjust the knob to a suitable setting for your driving conditions and vehicle/trailer combination once mode change is completed.

Everytime the vehicle is turned on, the Tow-Pro™ will start up in the mode that was last selected, providing the black wire has remained connected to power/battery positive.

For further assistance or technical support please contact REDARC directly.