Smart Start Load Disconnect Isolator

SKU
SBI12-LLD
Hassle-Free Warranty Australian Made
Free Tech Advice Suits Most Vehicles
Premium Product Quality Manufacturer Direct
Product details
The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed specifically for use in LiFePO4 battery applications as a system to protect the lithium battery from being excessively discharged by auxiliary loads.
OVERVIEW

The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed for use in lithium battery applications (LiFePO4) as a system to protect the battery from being excessively discharged by auxiliary loads, enabling the auxiliary battery to remain above the level at which internal protection circuitry would activate. Falling below this threshold would prevent many chargers from recharging the battery.

Put simply, once the auxiliary battery has been overly discharged, the Load Disconnect Isolator will turn off any connected loads. Similarly, if the battery climbs back above a suitable level, the Load Disconnect Isolator will restore power to the connected loads.

Installation of REDARC smart battery isolators should also see the use of quality fuse kits.

Spike protection 

The SBI12-LLD Smart Start battery isolator incorporates a number of spike protection components specifically designed to reduce the risk of damaging the unit. It is also designed to prevent any spikes generated by the solenoid coil from affecting vehicle equipment.

Features

  • Overmould design
  • Compact in size and easy to install
  • Silver contacts for longer life and suitable for marine applications
  • Power saving technology
  • Fault indication
  • Fully surge protected
Specifications
More Information
gtin_barcode 9338628005598
brand REDARC
Max. Inrush Current 400A
Max. Continous Current 100A
Turn On Voltage 11V
Turn Off Voltage 10.5V
Turn On Delay 10 seconds
Turn Off Delay 2 seconds
Standby Current <5mA
Operating Current <0.1A
Weight 200 g
height 70 mm
width 75 mm
depth | length 80 mm
Warranty 2 Years
System Voltage 12V
Output Voltage 12V DC
Input Fuse Rating 100A
Output Fuse Rating 100A
SHIPPING & RETURNS
Shipping

All REDARC orders within Europe are distributed by Oz4x4. 

 

For more information and delivery times, please contact Oz4x4 or see their Shippng FAQs. 

Returns

For all refund questions, please contact Oz4x4 or see their Shipping FAQs

RELATED PRODUCTS

HAVE A QUESTION?

Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.

Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.