Out of stockBattery Master Isolation Switch, 4PP Positive-Positive BMIS4PPV2KIT-PHA$2,425.01The REDARC BMIS4PPV2KIT is a Battery Master Isolation Switch with positive isolation designed for heavy vehicles with dual start cables to isolate both battery circuits.
Out of stockBattery Master Isolation Switch, 4PN Positive-Negative BMIS4PNV2KIT-PHA$2,425.01The REDARC BMIS4PNV2KIT is a Battery Master Isolation Switch with positive negative isolation designed to isolate both battery circuits.
Out of stock24V 10A Voltage Sense Relay VS24A$229.00The REDARC Voltage Sensor 24V is a voltage sensitive relay module for 24V systems. Perfect for use as a low voltage disconnect for loads, it can also be used as a trigger or controller.
12V 10A Voltage Sense Relay VS12A$199.00The REDARC Voltage Sensor is a voltage sensitive relay module for a 12V systems. Perfect for use as a low voltage disconnect for loads, it can also be used as a trigger or controller.
5 Circuit Trailer Lighting Reducer VRB5CA$1,799.00The REDARC VRB5C Trailer Lighting Reducer is a multi-circuit trailer lighting reducer designed to power incandescent and led trailer lamps.
Please note, the VRB5C is not suitable to replace existing OEM voltage reducer units, including VOLVO, IVECO, SCANIA, MAN etc.
Multi Function Timer TIM06A$219.00The REDARC Multi-Function Timer (TIM06) is a timer relay for 12 and 24V applications. Suitable for mobile and stationary installations, they feature customisable time and switching mode settings.
Multi Function Timer TIM05A$219.00The REDARC Multi-Function Timer (TIM05) is a timer relay for 12V and 24V applications. Suitable for mobile and stationary installations, they feature customisable time and switching mode settings.
Roll Over Sensor ROS1224A$1,399.00The REDARC Roll Over Sensor (ROS) signals the isolation switch to disconnect power to the truck system in the event of a rollover.
12V or 24V 10A Chopper Relay - Latching CR1224LA$219.00The REDARC Latching 'Chopper' Relay features 2 outputs which alternately Latch ON or OFF with the application of an input from a single, momentary action, push-button switch.
BMIS Connector Kit BMIS-CKA$229.00The REDARC BMIS Connector Kit is designed for installation on heavy vehicles where a factory harness is not available.
BMIS Adaptor Plate BMIS-APA$119.00The REDARC BMIS Adaptor Plate is designed to retrofit the REDARC Battery Master Isolation Switch to existing installation of other brand switches.
24V 20A In-Vehicle DC Power Supply DPS2420A$989.00The REDARC DPS2420 is a 24V 20 amp DC Power Supply that provides greater efficiency with regulated power for all sensitive load requirements with voltage output from a 24V automotive power system.















