How to adjust GoBlock input voltages

To be so widely compatible the GoBlock has the smarts enabling it to regulate the amount of electrical load (current) applied to the vehicles charging system (alternator) as not all vehicles are able to supply the power required for the maximum GoBlock charge rate of 50 amps.

 

GoBlock achieves this by monitoring and, if required, controlling the amount of charge current and therefore regulating the input voltage (starting battery voltage) which is set to a default of 12.7 volts. This setting ensures GoBlock will not draw the input voltage below 12.7 volts and also ensures the GoBlock only draws power when the vehicle’s alternator is charging.

 

See the full tech tip here