Tow-Pro Wiring Harnesses to suit imported US vehicles
The REDARC Tow-Pro TPH-005 US vehicle specific wiring harness offers the ability to connect the Tow-Pro™ Elite or Tow-Pro™ Classic electric brake controller directly to your Ford or Lincoln factory towing package connector behind your vehicle dash.The Tow-Pro Wiring Harness is available in multiple configurations to suit a large variety of Ford and Lincoln models and contains fitting instructions and the loom with compatible connector.
Mating harness adaptors are also available allowing the user to install the Tow-Pro™ using other manufacturers existing custom wiring installations.
The Tow-Pro Harness allows you to connect to the Tow-Pro Elite electric brake controller to the vehicle’s factory fitted connector with an easy plug and play design.
Simply plug one end of the harness to the electric brake controller connector and then plug the other end to the factory fitted connector behind the vehicle dash.
These harnesses will also connect to the Tow-Pro Classic with a small modification. The Tow-Pro Classic does not have a mating connector and requires bare wires to be inserted into the brake controller instead.
Make | Model | Start Year | End Year | Location Code |
FORD | E-150 Econolyne | 2009 | 2014 | G |
FORD | E-250 Econolyne | 2009 | 2014 | G |
FORD | E-350 Super Duty RV Cutaway, w/Factory Tow Prep Plug | 2009 | 2011 | G |
FORD | E-350 Econoline Super Duty | 2009 | 2014 | G |
FORD | E-450 Super Duty RV Cutaway, w/Factory Tow Prep Plug | 2009 | 2011 | G |
FORD | E-Series Cutaway | 2015 | 2017 | G |
FORD | Expedition | 2013 | 2014 | D |
FORD | F-250 Super Duty | 2008 | 2016 | B |
FORD | F-350 Super Duty Cab & Chassis | 2008 | 2016 | B |
FORD | F-350 Super Duty | 2008 | 2016 | B |
FORD | F-450 Super Duty Cab & Chassis | 2008 | 2016 | B |
FORD | F-450 Super Duty | 2008 | 2016 | B |
FORD | F-550 Super Duty Cab & Chassis | 2008 | 2016 | B |
FORD | Transit Van | 2009 | 2017 | G/D |
LINCOLN | Navigator | 2013 | 2014 | B |
Visit the Tow-Pro Elite accessories page to discover our full range of wiring kits, switch inserts and mounting accessories.
Please note that most older Australian model vehicles do not have this plug/connector from factory. Some late/current model vehicles may have a dedicated electric brake harness connector to suit but is yet to be validated by REDARC. For Australian model suitability, please consult with your local OEM Dealership.
gtin_barcode | 9338628004874 |
---|---|
brand | REDARC |
Connect and Control Options | 1 |
Battery Functionality | 1 |
Solar Regulator Type | 1 |
Connection Type | 1 |
IP RATING | 1 |
Total Output Current | 1 |
Watt | 1200W |
Kit Type | 1 |
Fuse type | Mega |
Cable Length | 812.8 mm |
Weight | 95 g |
Warranty | 2 Years |
Shipping
REDARC offers customers free freight within Australia on products purchased via the REDARC website, unless a dangerous goods charge is deemed necessary in order to ship products of a lithium chemistry.All products have a 5 day lead time before shipment after which it will be shipped via your preferred shipping method. For alternative freight options please contact REDARC at power@redarc.com.au
For international orders, freight will be calculated at time of checkout. Orders will be shipped from our factory in Lonsdale with delivery timeframes dependant on location.
Where orders are shipped to a delivery address outside Australia, you are responsible for the compliance terms as written in our Website Terms of Use
Returns
The terms and conditions relating to 'Return of goods' set out in our Trading Terms will apply to all good purchased by You via the Site. All goods purchased by You via the Site also come with a manufacturer's warranty found here.
HAVE A QUESTION?
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.