Hummingbird Electronics manufactures a range of user configurable tilt-switches. Applications for tilt-switches vary widely, and so do the parameters required for optimum performance. Using a built in USB interface and free software, users can set various parameters associated with the tilt-switches and can view their performance in real-time.
Dual axis sensing is supported and two configurable alarms are available.
Configurable tilt-switches measure pitch and roll angles with high accuracy by measuring the earth's gravitational field. Two internal voltage free relays can be programmed to close or open at various combinations of the measured pitch and roll. For maximum flexibility, normally open, normally closed and common outputs are available.
An integrated USB interface means that the sensor can be configured in-application using a laptop. The USB interface allows the following configuration:
- Set alarm conditions as a combination of pitch and roll.
- Set hysteresis on each alarm output to avoid erratic switching at the setpoint.
- Zero the sensor to eradicate small offsets due to mounting.
- Apply variable damping to avoid false readings in mechanically noisy, environments.
The configuration software also facilitates real-time monitoring of the pitch, roll and relay status. A scrolling graph allows the user to evaluate sensor response and noise in the application.
Please note that the integrated relay outputs are not internally fused. Driving currents larger than those specified will result in damage to the tilt-switch.
Under the product description is a link to download a configuration program for the Tilt Switch.
FEATURES:
- Accurate to 0.1 degrees for up to 30 degrees of tilt in any axis
- Manual calibration can be performed
- 2 voltage outputs
- USB configurable angle and voltage outputs
- Multi-voltage range from 9-36V
- Reverse polarity protected
- Separate outputs for pitch & roll
- Rugged aluminium enclosure
| gtin_barcode | 9338628009725 |
|---|---|
| Weight | 0.25kg |
| height | 35mm |
| width | 57mm |
| depth | length | 82mm |
| Warranty | 2 Years |
| Input Voltage | Min. 9V; Max. 36V |
Shipping
REDARC offers customers free freight within Australia on orders over $100 products purchased via the REDARC website, unless a bulky or dangerous goods charge is deemed necessary. Orders are dispatched within 2-7 business days and shipping times are estimated at between 3-7 business days, depending on factors including your location within Australia.
For orders under $100, freight will be calculated at time of checkout.
For international orders, freight will be calculated at time of checkout. Orders will be shipped from our factory in Lonsdale with delivery timeframes dependant on location.
Where orders are shipped to a delivery address outside Australia, you are responsible for the compliance terms as written in our Website Terms of Use.
More information on shipping can be found here.
Returns
REDARC do not offer refunds or store credit for change of mind.
The terms and conditions relating to 'Return of goods' set out in our Trading Terms will apply to all good purchased by You via the Site. All goods purchased by You via the Site also come with a manufacturer's warranty found here.
More information on returns can be found here.
HAVE A QUESTION?
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.
FIND REDARC AT LEADING RETAILERS
