-
![REDARC HBAKIT-001]()
Out of stockMating Connector to suit Hand Brake Alarm HBAKIT-001NZ$23.55Corresponding mating connector kit to suit REDARC's Hand Brake Alarm -
![REDARC HBA1224]()
Handbrake Alarm HBA1224NZ$259.05The REDARC Handbrake Alarm is used to monitor the handbrake switch and doorframe switch, providing audible and visual warning if the door is opened while the handbrake is not applied.
Hand Brake Alarms
The REDARC Hand Brake Alarm monitors the hand brake switch and door frame switch to provide audible and visual warning if the door switch is activated while the hand brake switch is not activated. Once the alarm starts, it stays latched on until the hand brake is applied (even if the door is closed again).
The Hand Brake Alarm comes with three connection options, a fly lead, a male connector lead 10 way (9 wire) or as a complete kit that features both a male connector and additional mating connector kit featuring housing and 9 pins.
The REDARC Hand Brake Alarm monitors the hand brake switch and door frame switch to provide audible and visual warning if the door switch is activated while the hand brake switch is not activated. Once the alarm starts, it stays latched on until the hand brake is applied (even if the door is closed again).
The Hand Brake Alarm comes with three connection options, a fly lead, a male connector lead 10 way (9 wire) or as a complete kit that features both a male connector and additional mating connector kit featuring housing and 9 pins.
NEED SOME HELP?
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.
Copyright © 2022 REDARC. All rights reserved.