Out of stockBattery Master Isolation Switch, 4PP Positive-Positive BMIS4PPV2KIT-PHNZ$2,628.47The REDARC BMIS4PPV2KIT is a Battery Master Isolation Switch with positive isolation designed for heavy vehicles with dual start cables to isolate both battery circuits.
Out of stockBattery Master Isolation Switch, 4PN Positive-Negative BMIS4PNV2KIT-PHNZ$2,628.47The REDARC BMIS4PNV2KIT is a Battery Master Isolation Switch with positive negative isolation designed to isolate both battery circuits.
Out of stock24V 10A Voltage Sense Relay VS24NZ$248.22The REDARC Voltage Sensor 24V is a voltage sensitive relay module for 24V systems. Perfect for use as a low voltage disconnect for loads, it can also be used as a trigger or controller.
Out of stock12V 10A Voltage Sense Relay VS12NZ$215.69The REDARC Voltage Sensor is a voltage sensitive relay module for a 12V systems. Perfect for use as a low voltage disconnect for loads, it can also be used as a trigger or controller.
Out of stock5 Circuit Trailer Lighting Reducer VRB5CNZ$1,949.95The REDARC VRB5C Trailer Lighting Reducer is a multi-circuit trailer lighting reducer designed to power incandescent and led trailer lamps.
Please note, the VRB5C is not suitable to replace existing OEM voltage reducer units, including VOLVO, IVECO, SCANIA, MAN etc.
Multi Function Timer TIM06NZ$237.37The REDARC Multi-Function Timer (TIM06) is a timer relay for 12 and 24V applications. Suitable for mobile and stationary installations, they feature customisable time and switching mode settings.
Out of stockMulti Function Timer TIM05NZ$237.37The REDARC Multi-Function Timer (TIM05) is a timer relay for 12V and 24V applications. Suitable for mobile and stationary installations, they feature customisable time and switching mode settings.
Out of stockRoll Over Sensor ROS1224NZ$1,516.39The REDARC Roll Over Sensor (ROS) signals the isolation switch to disconnect power to the truck system in the event of a rollover.
12V or 24V 10A Chopper Relay - Latching CR1224LNZ$237.37The REDARC Latching 'Chopper' Relay features 2 outputs which alternately Latch ON or OFF with the application of an input from a single, momentary action, push-button switch.
BMIS Connector Kit BMIS-CKNZ$248.22The REDARC BMIS Connector Kit is designed for installation on heavy vehicles where a factory harness is not available.
BMIS Adaptor Plate BMIS-APNZ$128.98The REDARC BMIS Adaptor Plate is designed to retrofit the REDARC Battery Master Isolation Switch to existing installation of other brand switches.
24V 20A DC Power Supply DPS2420NZ$1,071.98The REDARC DPS2420 is a 24V 20 amp DC Power Supply that provides greater efficiency with regulated power for all sensitive load requirements with voltage output from a 24V automotive power system.














